Example 3įinally, TIP31C can switch devices with medium power loads. The NPN transistor has an almost linear gain and an excellent amplifying factor. Secondly, you can use TIP31C to amplify signals. Therefore, TIP31C will favor high-speed switching applications. In the first case, you’ll use microcontroller pulses to control TIP31C because it has a high speed and gain response. We’re going to consider three situations to explain where you can TIP31C. We have cited its other capabilities in its features.

In addition, TIP31C can handle up to a maximum load voltage of 100V. For example, TIP31C can withstand a higher load voltage. While they may have a similar transistor number, they differ in voltages and the last alphabet. What’s more, its availability is in four different types, namely TIP31C, TIP31B, TIP31A, and TIP31. As a result, it can drive several loads simultaneously and conduct fast switching as a switch. TIP31 NPN transistor has a design for amplification, like audio amplifiers and general switching applications. In that way, you’ll avoid any damages that may occur due to unmet gain parameters, current, and voltage. However, before proceeding with the replacement, ensure you check the pin configurations and parameters of the equivalents. If you need a replacement of TIP31C or its equivalent, you can use the list here.

Lastly, its maximum storage and operating temperature should range from -65☌ to +150☌.

Its maximum collector-base voltage (Vcb) and maximum collector-emitter voltage (Vce) are both 100V.

In addition, the range of its minimum and maximum DC gain (hfe) is from 10 – 50.

Also, its maximum emitter-base voltage (VEBO) is 5V.

Its maximum current through the transistor base is 1AmpDC, whereas the maximum current through the transistor collector is 3AmpDC.

Then, its maximum collector current ( Ic) is 3A, while its maximum collector dissipation is 40 Watts.

First, its package type is TO-220, and it’s a medium power transistor type.

TIP31C has several specifications and features that we’ll discuss. Pin3/ Emitter (E) connects to the circuit ground (GND). Pin2/ Collector (C) – It connects to the load.

Pin1/ Base(B) operates as a trigger and consequently turns on the power transistor. TIP31C is a three-terminal NPN power transistor, with the package pinout below. Today, we elaborate on all the information you need to know about the TIP31C transistor.

Types of NPN transistors include TIP41C, 2N9401, BD435, TIP31C, BC107, to mention a few. In addition, electric currents control their operation. About TIP31C Pinout, Negative-Positive-Negative (NPN) power transistors, under bipolar junction transistors, amplify signals or circuit applications and have three layers.

Tip31 pinout